QD HB ZP Metal Primer High Build Anti Corrosive Zinc Phosphate Primer
5 Colour(s) Available
- Fast Dry Time In as Little as 20-40 Mins Touch Dry
- High Build Anti Corrosive Zinc Phosphate
- Quick Drying Primer Undercoat
- Spray Application By Brush & Roll In Small Areas
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £48.99 Inc. VAT
- Sale price
- £48.99
- Regular price
-
- Unit price
- per
Description
Quick Drying High Build Anti Corrosive Zinc Phosphate Primer
Quick Drying High Build Zinc Phosphate Anti Corrosive Metal Primer product name is Europrime 1 high build zinc phosphate based on a quick drying enamel resin suitable for mild steel. This product is for spray application however it can be brushes/rolled on small surface areas.
Aplications include;
- Gates
- Railings
- Skips
- Containers
- Cladding
- Structural Steel
- Industrial Buildings
- Metal Work
- New Metal
- Refurbisment work
- RSJ
- Fabrication Work
- Industrial aplications
- Barns
- Buildings
- Steel
- wrought Iron
- Metal Fencing
- Metal Furniture
- Excavarors
- Digger Buckets
About This Item
- HIGH PERFORMANCE QD HB ZINC PHOSPHATE ANTI CORROSIVE METAL PRIMER - Hard wearing quick drying high build primer.
- HIGH ANTI CORROSION PROTECTION PRIMER PAINT - A perfect choice to help freshen up old paint work or providing a new project with a quality professional finish.
- KEY FACTS & BENEFITS - Coverage 8m2 per Litre. Touch Dry in 30-45 mins, Overcoat 1 - 24 hours. Providing good weathering resistance. No Catalyst Required. High coverage and opacity. Two coats recommended for best results.
- EASY APPLICATION-By Solvent Resistant paint brush, roller in small areas & suitable spray application to mild steel and other suitable prepared surfaces.
- MULTI PURPOSE PU PAINT - Only the finest raw materials are used in our coatings to provide the best finish every time.
- Thinners T1000
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first. Quick drying paints cannot be applied over white spirit based paints as it will attack.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with this primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – Apply one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. Overcoat time 1-24 hours.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Apply Primer
Step 3 Topcoat – 1-24 hours after applying the primer you can add your first coat of topcoat. Wait another 1-24 hours and then apply the second coat.
Other Application Advice
Always stir any paint well prior to using, as our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
Spraying Advice
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
Our product titles are for advertising purposes only, this product will arrive as Europrime 1 HB ZP Primer tins supplied will be similar to that shown above, manufactured by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.