Description
Solvent Free Epoxy Floor Dust Sealer Clear is a high-performance clear epoxy coating which has been specially formulated to seal and protect concrete floors, preventing dusting as well as enhancing the surface with a gloss finish. Ideal for both industrial and residential applications, this sealer forms a tough barrier that shields against moisture, chemicals, and heavy traffic.
Important Notice:
Do not apply two pack epoxy paint in temperatures below 10 degrees Celsius, as the cross-linking of the paint and catalyst will not occur, preventing the coating from fully drying.
Please note that the clear version of our Two Pack Epoxy Sealer is not fully translucent. Due to the natural colouring of the resin, it has a slight yellow tinge.
About This Item
- NEW 3-IN-1 TECHNOLOGY: Primes, seals, and protects with just two coats.
- MIXING RATIO: This product is measured by volume, not weight, with a mixing ratio of 4.220 kg of paint to 0.780 kg of catalyst.
- APPLICATION: Apply by brush or medium pile rollers.
- COVERAGE: 5KG pack covers approximately 20 square meters. This does not account for the method of application, absorption of substrate or wastage.
- POT LIFE: Once catalysed, the pot life is approximately 45 minutes.
- DRYING TIMES: Full curing takes 7 days, but the area can be walked on after 4 days.
- THINNERS: T0200 Epoxy thinner (if required).
New Concrete Floors
New concrete floors require a curing period, typically ranging from 3-5 months after the floor is laid. This duration can vary based on the thickness and quality of the concrete. It’s advisable to consult with the supplier or fitter regarding the specific waiting time before painting.
Application
Painting a Bare Substrate:
New concrete floors require a curing period, typically ranging from 3-5 months after the floor is laid.
Step 1 - Clean: Ensure the substrate is completely dry and free of any dirt, oil, or grease.
Step 2 - Prime: If you are using a product to fill cracks and holes, first prime the area with the same product using a brush. Allow it to set for 1 hour before pouring in additional product until the affected area is filled.
Step 3 - Topcoat: Once the previous steps are complete, apply your first coat of topcoat. Begin by cutting in around the edges with a 2 or 3-inch brush, then work backwards towards the exit. After 12-24 hours, apply a second coat.
For larger areas, it’s easier to pour the paint onto the floor in stages, spreading it out with a squeegee. Then back roll with a roller to release any trapped air, which helps prevent a bubbly finish during the drying process.
Mixing
- Use a mixer on a slow-running drill to mix the paint and catalyst together. An egg whisk, screwdriver, or small stick that doesn’t reach the bottom of the can is insufficient for proper mixing.
- Mix the catalyst into the paint for 3-5 minutes, allow to stand for a minute, and then repeat.
- Combine the catalyst into the tub before pouring it into a paint tray.
- Ensure all components are thoroughly mixed to avoid any colour inconsistencies or drying issues.
Paint mixers are available to purchase. Click here to buy one.
Prime Colors
Clear Sealer
Size
5KG
