QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint
QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint
QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint
  • Load image into Gallery viewer, QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint
  • Load image into Gallery viewer, QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint
  • Load image into Gallery viewer, QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint

QD RAL Metal Paint Industrial Gloss & One Coat Direct To Metal Paint

  • Multi-Buy Discounts
  • Free Delivery Available
£79.99 Inc. VAT
£79.99
Exc. VAT
Sold out
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable

Free delivery is available for this product. Order today!

Bulk Discount Qty Multi-buy Price Off Per Item
Buy 2 or more £2.50 Off Each
Buy 3 or more £3.30 Off Each
Buy 4 or more £4.00 Off Each
Buy 4 or more (5L Only) 30% Off Each
Buy 8 or more (5L Only) 35% Off Each
Buy 12 or more (5L Only) 45% Off Each
Buy 20 or more (5L Only) 50% Off Each

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

Description

Description

Quick Drying Industrial Ral Paint

Our industry-leading QD RAL metal paint provides exceptional quality and performance for industrial spray applications, ensuring professional results. Available in a wide range of RAL colours, our metal paints offer durability and a choice of finishes to meet specific project needs. Take advantage of our bulk discounts on RAL metal paints at TA Paints.

In industrial settings, time is critical. Our Quick-drying formula allows for quicker recoating and handling, minimising project delays and increasing productivity. Its quick curing is ideal for high-traffic facilities where minimal interruption is crucial. This makes our QD Paints  an optimal choice for factories, warehouses, and construction sites where steel components need protection without extended curing times.

Quick Drying Gloss Metal Paint - Eurospeed 1 is a premium, high gloss quick  drying enamel paint designed specifically for industrial applications, providing a durable, protective finish on primed mild steel.

Quick Drying One Coat Direct to Metal is a semi-gloss primer finish is expertly formulated using premium quick-drying resin, making it ideal for direct application on metal surfaces as it has anti corrosive properties.

 

Please Click Here to see our stock colour range

Browse our colour charts to find the perfect match. For precise colour requirements, shop our reliable RAL metal paints—one of the most recognized colour systems worldwide. Please note that colours on digital screens may vary.

Can’t see the product you’re looking for in your desired colour or buy in bulk regularly and use drums? Contact us today to see how we can hel

RAL Colour Chart

 

About This Item

About This Item

Quick Drying Gloss

  • QUICK DRYING: Specially formulated for industrial spray applications, ensuring rapid drying for efficient use.
  • SUITABLE SUBSTRATES: Primed Metal, Aluminium, Fibreglass, Wrought Iron, treated and primed Galvanised Steel.
  • FINISH: Gloss.
  • COVERAGE: Approximately 8 square metres per litre. This does not account for the method of application or wastage.
  • DRYING TIME: Touch Dry in 20-30 minutes, overcoat after 1 hour and within 4 hours. If you go over 4 hours it will need to be left 12 hours after as the coating can attack itself.
  • APPLICATION: Best to be sprayed but you can brush/roller small surface areas.
  • SHELF LIFE: 12 Months.
  • THINNERS: T1000 Xylene

Quick Drying Semi-Gloss Direct to Metal

  • QUICK DRYING: Specially formulated for industrial spray applications, ensuring rapid drying for efficient use that can be used direct to metal.
  • SUITABLE SUBSTRATES: Bare Metal, Primed Aluminium, Primed Fibreglass, Primed Wrought Iron, treated and primed Galvanised Steel.
  • FINISH: Semi-gloss.
  • COVERAGE: Approximately 8 square metres per litre. This does not account for the method of application or wastage.
  • DRYING TIME: Touch Dry in 20-30 minutes, overcoat after 1 hour and within 4 hours. If you go over 4 hours it will need to be left 12 hours after as the coating can attack itself.
  • APPLICATION: Best to be sprayed but you can brush/roller small surface areas.
  • SHELF LIFE: 12 Months.
  • THINNERS: T1000

Application

Application

Painting over existing paint

Step 1

Before starting, ensure you have the correct PPE and RPE, to protect against atomised particles that are being generated when spraying.

Check suitability of the product to the existing paint. We recommend you try a sample area first as quick drying paints cannot be applied over white spirit based paints as it will attack. 

Ensure you have good ventilation to allow vapour to escape; ventilation is also necessary to maintain drying times. Without air movement, the coating will not dry properly.

Step 2 Clean and Abrade -

  • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
  • If there is flaking paint this must be removed prior to painting.
  • Ensure the substrate is dry and clean of any dirt, oil, or grease.

Step 3 Prime – For any bare metal showing or any parts that have rusted you will need to sand the rust back to the bare metal and spot prime with our Quick Drying Primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. overcoat after 1 hour and within 4 hours. If you go over 4 hours it will need to be left 12 hours after as the coating can attack itself.

Two coats of topcoat are recommended for optimal coverage. Be sure to stir the paint well before use.

Painting bare substrate 

Step 1 - Before starting, ensure you have the correct PPE and RPE, to protect against atomised particles that are being generated when spraying.

Ensure you have good ventilation to allow vapour to escape; ventilation is also necessary to maintain drying times. Without air movement, the coating will not dry properly.

Step 2 Clean and Abrade - Ensure the substrate is dry and clean of any dirt, oil, or grease, by using a degreaser. 

Step 3 Prime –

QD Gloss Finish - As this top coat does not have any anti corrosive properties, we recommend you apply one coat of our Quick Drying Primer.

QD Semi-Gloss Direct to metal - As this product has anti-corrosive properties, you don't necessarily need to prime as it can be used directly to metal; however, if you need additional anti corrosive protection we recommend using one coat of our Quick Drying Primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. overcoat after 1 hour and within 4 hours. If you go over 4 hours it will need to be left 12 hours after as the coating can attack itself.

Two coats of topcoat are recommended for optimal coverage. Be sure to stir the paint well before use.

Primers

Primers

Mild Steel: If you are painting mild steel, you will need our Quick Drying Metal primer.

Fibreglass: If the fibreglass is bare, you will need a fibreglass primer. Use our single-pack fibreglass primer.

Galvanised Steel: After treating the galvanised steel with Mordant Solution (T-Wash), you will need our Quick Drying Metal Primer.

Etch Primer: Use one pack etch primer.

Aluminium: The suitable primer for aluminium is two-pack etch primer.

Plastic/UPVC: Use UPVC Primer or a two-in-one primer and topcoat.

Mixing

Mixing

Always stir any paint well before use, as our coatings are heavily pigmented and separation can easily occur. You may experience colour float; for example, a green paint can appear blue before mixing. This is one of the reasons why mixing your paint before use is essential.

  • Use a mixer on a slow-running drill or a palette knife on smaller cans to mix the paint. An egg whisk, screwdriver, or small stick that doesn’t reach the bottom of the can is insufficient for proper mixing.
  • Mixing should take place for 3-5 minutes.
  • If you are adding thinners; they will need to be added once stirred.
Spraying

Spraying

If applying with a pot gun:

Use a 1:2 to 1:4 tip setup and thin by 10% if required. More thinners may be added to achieve good atomisation and improve the flow of the paint, resulting in a better finish.

Air-assisted or Airless system:

Use an 11-13 thou tip (no thinners are usually required). If thinning is necessary, use around 10%. Set air and paint pressures until good atomisation is achieved and fingering (lines in the spray) have blended in.

Additional Information

Prime Colors

Gloss, Semi-Gloss, Matt

Tags

Size

5 Litre, 2.5 Litre, 1 Litre