Damp Proof Paint
10 Colour(s) Available
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £85.99 Inc. VAT
- Sale price
- £85.99
- Regular price
-
- Unit price
- per
Description
Best Damp Proof Paint
Solvent Free Damp Proof Paint is a eco-friendly coating for basement and cellar floors and walls. Perfect for both domestic and commercial use as it is low odour.
This product is suitable to be applied to concrete and brick which is susceptible to damp. The product seals off the substrate creating a protective barrier keeping damp at bay
Please note although SF Epoxy coating’s offer the best chemical resistance and protection from the elements, the colours will chalk and fade in external applications.
Mixing Two Pack Epoxies
-
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix (An egg whisk, screwdriver or small stick that doesn’t reach the bottom of the can is not sufficient enough)
- Mixing should take place for 3-5 minutes allow to stand for a minute and repeat.
- Mix the catalyst in to tub before tipping into a paint tray
- Ensure all the content is properly mixed to avoid colour and or drying problem.
Key Facts
Can be applied by brush & rollerMinimal operation temperature is 10 degreesMixing Ratio 4.220 KG paint to 0.780 KG Catalyst per 5KG
Once catalysed pot life of 45 mins
Do not pre seal the floor especially with latex or PVC sealers paint will not stick.
Easy Clean High Gloss Finish
Low Odour Touch Dry 2-4 hours
Over coat 12-24 hours
Foot traffic – 24-48 hoursCars 7 daysProduct exhibits good chemical & weather resistance Self-levelling Paint
Can be used as a floor repair to fill holes and cracks. Simply prime the area with the product using a brush allow to go tacky (30-60 mins) the poor the product until filled
Coating will fade and chalk in external applicationsSuitable for heavy traffic Like cars, forklift trucks, vans and plantFull hardness, scratch & chemical resistance – 7 days Thinners suitable QD T1000 Covers Approx. 18-20 square metres per 5KG (this does not account for the method of application, absorption of substrate or wastage)
Two coats recommended for best results
No Primer Needed Just Apply Two Coats 1st Coat Will Act As A PrimerMake sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems. Thinners required are QD Thinners.
Do not apply Two Pack Epoxy Paint in temperatures below 10 degrees centigrade, the cross linking of the paint and catalyst will not take place and the coating will never fully dry.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.