2K Poly Paint
- Application By Brush Roller & Suitable Spray
- Fast Dry Time In as Little as 10-30 Mins Touch Dry
- Premium High Gloss UV Protective 2 Pack Poly Paint
- Suitable for Primed Metal Surfaces & Vehicles With A Hard Glossy Finish
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £189.99 Inc. VAT
- Sale price
- £189.99
- Regular price
-
- Unit price
- per
DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable
Description
2K Polyurethane is a high performance complaint coating consisting of an acrylic modified pigment base coupled with an isocyanate polymer based hardener.
The product provides a tough and durable mirror-like gloss film with excellent chemical and solvent resistance coupled with very fast drying and rapid cure.
Designed for the coating of commercial vehicles, trailers, chassis and agricultural equipment, the fully cured coating is hard wearing and durable and demonstrates excellent resistance to weathering.
The mixed product contains isocyanate. To ensure the protection of sprayers and other personnel in the vicinity of the painting operation, please read the Material Safety Data Sheet before use.
Key Facts
- Mixing Ratio 2:1
-
Spray application and touch in with a brush
- Touch Dry 2 -3 minutes
-
Handleable within 4-6 hours
- Hard Dry 12 Hours
- Full properties - 7 days
-
Covers Approx. 13-14 square metres per litre based on a dry film thickness of 50 microns, depending on application method and substrate.
- Suitable for use over a range of compliant primer as well as suitably prepared existing finishes
- Shelf life - 12 months from batch date
Spray Gun Recommendations
HVLP
Fluid tip: 2.0 - 2.2mm (suction feed) 1.0 - 1.2mm (pressure feed)
For application by HVLP a working pressure of 3 bar is recommended.
Apply two full coats with a flash off 5 - 10 minutes between coats to allow solvent evaporation.
Airless and air assisted airless
0.22 - 0.28mm (9-77 thou) tip size, 40-60°C angle at 90-120 bar (1350-1800 psi)
Apply one light and one full coat (40-50 microns)