Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
- Application Brush & Roll & Suitable Spray
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- One Coat Anti Corrosive Direct To Metal Semi Gloss Primer Finish
- Suitable For Metal, Wood, Concrete, Stone & Brick
- Regular price
- £79.99 Inc. VAT
- Sale price
- £79.99
- Regular price
-
- Unit price
- per
DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable
Description
Direct to Metal Paint Primer Finish One Coat Anti-corrosive
Direct To Metal Paint One Coat Primer Finish Anti Corrosive is a semi-gloss finish primer finish. It contains anti-corrosive pigments and can be used as a one coat application (no primer needed), to mild steel substrates.
This product can be used for many different applications such as metal paint, gates and railing paint, chassis paint, agricultural paint, crane and lifting gear paint, skip & container paint, scaffold marking paint or stillage / pallet paints.
About this item
- DIRECT TO METAL PAINT: Specially developed to provide a one coat system (no primer needed) for metal applications. Suitable for both indoor and outdoor applications.
- WATERPROOF OUTDOOR PAINT: Exceptional coverage & does a great job of repelling rainwater and provides high protection from the harsh environmental elements, With long lasting UV protection.
- MULTI PURPOSE: It's versatile and can be used in home garden and industrial applications like fence panels, garden arches, benches, sheds, fences, arbours, summer houses, trellis, garden patio furniture, gates and railings, skips & containers, buildings steel fabrications and much more
- FAST DRYING TIME: Touch Dry in 2-4 hours, overcoat 12 - 24 hours making this product perfect for outdoor use and for a DIY project
- EASY APPLICATION: Brush, roller and suitable for spray applications.
- Thinners suitable T0001 White Spirit
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans
Application Tips
Two coats of paint are recommended for the best longest lasting finish.
If brushing thinning is not usually required but if you preferred to thin the product start 5%
Remember good preparation is paramount to an excellent long lasting finish.
Before you start, have your PPE ready as our paint is oil based so will not wash off easily with soap and water
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Ensure substrate is dry and clean of any dirt, oil, or grease
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal. For the best protection spot prime with an appropriate primer.
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. 12-24 hours apply the second coat unthinned
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is dry and clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting a primer may be needed see 'Primers' section below. For mild steel you can go straight ahead with this paint however for harsh environments a primer can be used.
Step 3 Topcoat – Apply paint, 12-24 hours after apply the second coat.
Primers
Other Application Advice
Always stir any paint well prior to using.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality over price.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.