Custom Fence & Shed Paint 3 in 1 Primer Sealer & Protects Oil Based PU Enamel
- Application By Brush Roller & Suitable Spray
- Easy To Use Multi Purpose Garden Paint
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- Suitable For Metal, Wood, Concrete, Stone & Brick
- Regular price
- £79.99 Inc. VAT
- Sale price
- £79.99
- Regular price
-
- Unit price
- per
DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable
Benefits of TA Paints
- Easy Application - Saving you precious time
- Fast Drying - Less likely to be ruined whilst drying as its not wet for long
- Multi Application - Use across multiple surface finishes
Benefits
- Multi surface use
- Coverage 8-10 m2 per litre
- Resistant to chemicals and the elementsHigh anti corrosion properties
- Strong Polyurethane coating for new and refurbishment projects
- Universal Mutli Surface Paint a one paint does all coating for concrete, metal, wood, timber & ply
Surface Preparation Checklist
- Chemically or mechanically hardened floors may need abrasion prior to application
- Remove old paint if necessary
- Remove all loose and flaking materials then clean all dust and dirt from surface to assist good adhesion
- Ensure surface is clean dry and free from any oil or grease that will contaminate the coating and prevent drying
- Ensure surface is at ambient temperature prior to painting to avoid blooming and a slow dry time
Application Tips
- Stir well before use with a substantial stick or metal stirrer
- 1-2 coats recommended for best results depending on substrate. For example, porous substrates like wood and timber may need 2 coats, nonporous like metal with require 1 coat
- Fibreglass & GRP will require a separate primer first
- Apply by brush, roller, or suitable spray applications
- Ensure good ventilation during and after application
- Always wear proper PPE gloves, glasses and suitable clothing
Description
Custom Fence & Shed Paint
Fence & Shed Paint is a multi purpose paint for Wood, Metal, Brick, Stone and Concrete which can be applied by brush/roller & spray gun.
This is a white spirit oil based single pack polyurethane coating that provides a long lasting finish compared to water-based equivalents. With UV and weather resistance it is suitable for outdoor structures like fences and sheds.
About this item
- HIGH QUALITY LONG LASTING OIL BASED: Specially developed to colour and preserve garden projects, our polyurethane oil based formula provides a much longer lasting finish than cheap water based alternatives.
- WATERPROOF OUTDOOR: Exceptional coverage & does a great job of repelling rainwater and providing high protection from harsh environmental elements, with long lasting UV protection.
- MULTI PURPOSE: It's versatile and can be used to paint wood, brick, terracotta, primed metal, timber & concrete. Not only can it be used on your fence panels, but it is also perfect for garden arches, benches, sheds, fences, arbours, summer houses, trellis and garden patio furniture.
- FAST DRYING TIME: Touch Dry in 2-4 hours, Overcoat 12 - 24 hours making this product perfect for outdoor use and for a small DIY project
- EASY APPLICATION: Brush, roller and suitable spray application.
- Thinners suitable T0001 White Spirit
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BCpaints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre.
Application Guide
Two coats provide optimal coverage and durability, as well as protection against various environmental factors.
Painting Guide Step By Step
- Abrade area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates.
- The area must be clean and free from dirt, dust, oil, grease, old flaking paint and be dry & clear of any other contaminants. Good preparation is key to a good finish.
- Before you start, have your PPE ready as our paint is oil based so will not wash off easily with soap and water.
- Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
- Thin the first coat by 10 percent with T0001 if painting wooden surfaces, to assist good absorption.
- Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
- Cut in around the edges and hard to reach areas first with brush, if brushing and rolling is your application method.
- Depending on what you're painting, apply a second coat 12-24 hours or an overnight dry after the first coat to build good colour and protection.
Application - Painting over existingpaint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Primers
Always stir paint well prior to using
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Spray Gun Advice
If applying with a pot gun
If applying with a pot gun
Use a 1:4 to 1:8 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization.
If applying with an airassisted or airassisted airless system Use a 13-15 thou tip no thinners usually required. If thinning is necessary use around 10%
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeLling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise on quality for cost.
