Two Pack Epoxy Marine Deck Paint High Chemical and Weather Resistance
10 Colour(s) Available
- Application By Brush Roller & Suitable Spray
- Heavy Duty For Heavy Traffic Inc Vehicles
- Suitable For Concrete Stone & Brick
- Walk On Dry Time as Little as 24 Hours
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £85.99 Inc. VAT
- Sale price
- £85.99
- Regular price
-
- Unit price
- per
Description
Marine Two Pack Epoxy Resin Paint
Two Pack Epoxy Marine Deck Paint is suitable for use on primed metal and direct to fibreglass/GRP decks where excellent chemical resistance and protection from harsh environments is required.
Two Pack Epoxy Marine Paint is based on an epoxy resin that provides an excellent hard wearing coating once fully dry, with a mirror like gloss finish to mild steel and other suitably primed substrates.
Mixing Epoxy Paint
-
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix (An egg whisk, screwdriver or small stick that doesn’t reach the bottom of the can is not sufficient enough)
- Mixing should take place for 3-5 minutes allow to stand for a minute and repeat.
- Mix the catalyst in to tub before tipping into a paint tray
- Ensure all the content is properly mixed to avoid colour and or drying problem.
About Marine Two Pack Epoxy Resin Paint
- TWO PACK EPOXY RESIN MARINE BOAT DECK PAINT: Two part epoxy based resin with a high quality durable finish.
- HARD WEARING EPOXY RESIN MARINE BOAT DECK PAINT - For heavy use areas that are prone to extreme weather or chemicals such as marine hulls and engine rooms
- TOUGH EPOXY FORMULA - Perfect for above or below the waterline where extra protection is needed.
- EASY TO USE 2PK EPOXY MARINE PAINT - Mixing ratio 4 parts paint to 1 part hardner mix well, Apply by brush or roller, solvents are strong in this epoxy paint so solvent resistant brushes and rollers will be required.
- POT LIFE FOR TWO PACK EPOXY PAINT - Once components are mixed pot life is around 4-6 hours.
- Epoxies can not be applied over single pack paints as it will attack the existing coating.
- Thinners if required T0200 Epoxy thinner
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for, 1 and 2.5, and occasionally 5 litre cans.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first. Epoxies cannot be applied over single pack paints.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is dry clean of any dirt, oil, or grease.
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – If you are painting bare metal or GRP you will need the following products
Two Pack Fibreglass Primer - Click here
Two Pack Epoxy Metal Paint - Click Here
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Remember do not apply Two Pack Epoxy Paint in temperatures below 10 degrees centigrade cross linking of the paint and catalyst will not take place and the coating will never fully dry.
Always stir your paint up well prior to using
Especially when using Two Pack Epoxy products. As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
