Description
Chlorinated Rubber
Swimming Pool & Pond Paint
Chlorinated Rubber Swimming Pool & Pond Paint product name Eurochlor 1 is base on a chlorinated rubber hard resin in a xylene solvent. Eurochlor 1 is excellent for use where good chemical resistance is needed, it is widely used on artificial ponds and swimming pools that are made from fiberglass brick or concrete, and provides excellent elasticity so doesn’t crack when it is flexed and bent.
It is suitable for use on concrete, brick, stone along with suitably prepared & primed metal and fiberglass to provide a flexible protective coating with excellent chemical resistance.
About This Item
NEW 3 IN 1 TECHNOLOGY - Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete, 2 coats of this Chlorinated Rubber Swimming Pool & Pond Paint will prime seal and protect.
HIGH PERFORMANCE CHLORINARED RUBBER SWIMMING POOL & POND PAINT - Widely used on pools that are made from fiberglass, brick, or concrete.
PREMIUM GLOSS FINISH - Chlorinated Rubber Swimming Pool & Pond Paint is supplied in a gloss finish as matting the finish to a satin, semi-gloss or matt finish reduces the quality, integrity and effectiveness of the coating.
HIGHLY RESISTANT EASY CLEAN SWIMMING POOL PAINT & POND PAINT - Resistant to weathering along with many industrial and domestic chemicals, making it a perfect choice whether painting new projects or refurbishing an existing pool.
MULTI PURPOSE EASY APPLICATION CHLORINATED RUBBER PAINT- By Paint brush, roller & suitable to be sprayed.
CHLORINATED RUBBER KEY FACTS & BENEFITS - Coverage 8m2 per Litre | Touch Dry in 20-40 Mins| Overcoat 12-24 hours | Full protection and waterproof after 7 Days | No Catalyst Required | Multi Surface | Two coats recommended for best results.
Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans
Application
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Spray Application Guide
If applying with an air assisted or air assisted airless system - Use a 11-13 thou tip no thinners usually required. If thinning is necessary use around 10% Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required. More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
Good Preparation is paramount to an excellent long lasting finish. Make sure substrate is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.
New Concrete will need time to green this generally is a period of 3-6 months from when the concrete is laid, we say 3-6 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete as to how long to wait till painting.
Always stir paint well prior to using
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Prime Colors
Black, White, BS 18 E 51 Delphinium Blue, BS 18 E 53 Regatta Blue, BS 20 E 51 Cornflower Blue, BS 00 A 05 Goosewing Grey, BS 18 B 25 Grey
Size
5 litre, 2.5 litre, 1 litre
