Description
Upgrade the safety and durability of your workspace with our Two-Pack Epoxy Non-Slip Metal Floor Paint, the ultimate solution for high-performance, heavy-duty flooring. Specially formulated for industrial metal floors, this premium epoxy paint delivers a tough, seamless, and long-lasting finish that resists chemicals, oils, abrasion, and heavy wear. Its non-slip properties ensure maximum traction, reducing the risk of slips and falls even in demanding, high-traffic areas. Ideal for factories, warehouses, workshops, and other industrial settings, this floor paint adheres strongly to primed metal surfaces, providing reliable protection and a professional-grade appearance. Easy to apply and formulated for durability, it’s the perfect choice for industrial flooring solutions that prioritise safety and performance.
Important Notice:
Do not apply two pack epoxy paint in temperatures below 10 degrees Celsius, as the cross-linking of the paint and catalyst will not occur, preventing the coating from fully drying.
While epoxy coatings are renowned for their superior chemical resistance and protection against the elements, it’s important to note that colours may chalk and fade when used in external applications.
It is also essential to remember that two pack epoxy paints cannot be applied over existing single pack paints, as they will react with them.
About This Item
- EPOXY ANTI SLIP FLOOR PAINT: This two-part epoxy-based resin includes an aggregate mixed in, providing a rough textured finish that reduces the risk of slips.
- SUITABLE SUBSTRATES: Metal.
- APPLICATION: Apply by brush or solvent-resistant medium pile rollers.
- MIXING RATIO: The mixing ratio 4:1. 4 parts paint to 1 part hardener.
- POT LIFE: Once the components are mixed, the pot life is around 4-6 hours.
- COVERAGE: Approximately 8 square metres per litre. This does not account for the method of application, absorption of substrate or wastage.
- DRYING TIMES: Touch dry 2-4 hours. Full curing takes 7 days, but the area can be walked on after 4 days.
- THINNERS: T0200 Epoxy thinner
- SHELF LIFE: 12 months.
Proudly manufactured in England by B.C Paints Ltd. Images and product titles are for advertising purposes only; tins are supplied in BC Paints cans or plain white for 1 and 2.5, and occasionally 5 litre cans.
Application
Painting a Bare Metal Floor:
Ensure good ventilation to allow vapour to escape; this is also essential for maintaining drying times. Without air movement, the coating cannot dry effectively.
Be sure to stir the paint well before use.
Step 1 - Clean: Ensure the substrate is completely dry and free of any dirt, oil, or grease.
Step 2 - Prime: As this product does not have anti corrosive properties you will need to use one coat of our Two Pack Epoxy Primer. Begin by cutting in around the edges with a 2 or 3 inch brush, and work backwards towards the exit.
Step 3 - Topcoat: Apply the first coat of top coat and overcoat with the second coat 12-24 hours after the first coat for optimal adhesion and performance. If you go over 24 hours then a light abrasion will be needed.
Two coats of topcoat are recommended for optimal coverage.
Application - Painting Over Existing Paint:
Ensure good ventilation to allow vapour to escape; this is also essential for maintaining drying times. Without air movement, the coating cannot dry effectively.
Be sure to stir the paint well before use.
Step 1 - Preparation: Check the suitability of the product for the existing paint. We recommend trying a sample area first, as two-pack epoxies cannot be applied over single-pack paints.
Step 2 - Clean and Abrade:
- Ensure the existing paint is in good condition before painting.
- Lightly abrade the surface to provide a key for good intercoat adhesion.
- Remove any flaking paint prior to painting.
- Ensure the substrate is dry and clean of dirt, oil or grease.
Step 3 - Prime
For any rusted areas, sand back to bare metal and spot prime with the appropriate two pack epoxy primer.
Step 4 - Topcoat: Apply the first coat of top coat and overcoat with the second coat 12-24 hours after the first for optimal adhesion and performance. Begin by cutting in around the edges with a 2- or 3-inch brush, and work backwards towards the exit.
Two coats of topcoat are recommended for optimal coverage.
Primers
When painting bare metal a primer will be needed as this top paint doesn't have any anti-corrosive properties. Please see a list of compatible primers.
Two Pack Epoxy HB Zinc Phosphate Primer
Two Pack Epoxy MIO
Two Pack Epoxy Zinc Rich Primer
Mixing
- Use a mixer on a slow-running drill or a palette knife on smaller cans to mix the paint and catalyst together. An egg whisk, screwdriver, or small stick that doesn’t reach the bottom of the can is insufficient for proper mixing.
- Mix the catalyst into the paint for 3-5 minutes, allow to stand for a minute, and then repeat.
- Combine the catalyst into the tub before pouring it into a paint tray.
- If you are thinning the paint for the first coat, this is added once the paint has been catalysed.
- Ensure all components are thoroughly mixed to avoid any colour inconsistencies or drying issues.
Make sure to thoroughly stir the paint before application, as the aggregate can settle on the surface. If the non-slip component isn't mixed well, you'll end up with a thick concentration of it initially, causing uneven distribution—resulting in less non-slip texture as you use more of the paint.
Prime Colors
Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 08 E 51 Yellow, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 445 Tile Red, RAL 5012 Light Blue, White
Size
5 Litre, 2.5 Litre, 1 Litre
