Two Pack Epoxy Bilge / Hull Paint Above or Below the Waterline
10 Colour(s) Available
- Above & Below The Waterline
- Application By Brush Roller & Suitable Spray
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- High Anti corrosion & Chemical Protection for Metal
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £85.99 Inc. VAT
- Sale price
- £85.99
- Regular price
-
- Unit price
- per
Description
Two Pack Epoxy Marine Bilge & Hull Paint is designed for use on a wide range of substrates, particularly mild steel fiberglass GRP, and treated galvanised steel alumiuium. It should only be used in situations where there is limited exposure to U.V. Light or where cosmetic appearance over a period of time is not important. Two Pack Epoxy Marine Paint offers a water resistant coating and can be used
Two Pack Epoxy Marine Paint is based on an epoxy resin that provides an excellent hard wearing coating once fully dry, with a mirror like gloss finish to mild steel and other suitably primed substrates.
Mixing Two Pack Epoxies
-
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix (An egg whisk, screwdriver or small stick that doesn’t reach the bottom of the can is not sufficient enough)
- Mixing should take place for 3-5 minutes allow to stand for a minute and repeat.
- Mix the catalyst in to tub before tipping into a paint tray
- Ensure all the content is properly mixed to avoid colour and or drying problem.
About Marine Two Pack Epoxy Resin Paint
- TWO PACK EPOXY RESIN MARINE BOAT PAINT: Two part epoxy based resin with a High Quality Durable finish.
- HARD WEARING EPOXY RESIN MARINE BOAT PAINT - for heavy use areas that are prone to extreme weather or chemicals Like marine hulls and engine rooms
- TOUGH EPOXY FORMULA - Perfect for above or below the waterline where extra protection is needed.
- EASY TO USE 2PK EPOXY FLOOR PAINT - Mixing ratio 4 parts paint to 1 part hardner mix well, Apply by brush or roller, solvents are strong in this epoxy paint so solvent resistant brushes and rollers will be require.
- POT LIFE FOR TWO PACK EPOXY PAINT once components are mixed pot life is around 4 hours.
- Thinners if required T0200 Epoxy thinner
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for, 1 and 2.5, and occasionally 5 litre cans.
Easy to apply by brush and roller.
Two coats of paint are recommended for the best longest lasting finish,
Remember good preparation of the floor is paramount to an excellent long lasting finish. Make sure Floor is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting, especially with latex or PVC sealers paint will not stick.
Brushes and rollers will need to be solvent resistant.
Painting Step By Step
- The area must be clean and free from dirt, dust, oil, grease and be dry & clear of any other contaminants. Good preparation is key to a good finish.
- Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
- Stir the paint & catalyst together well before use (4-1 mixing ratio), with a paddle on a slow running drill or substantial stick.
- Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
- Cut in around the edges first with a 2 to 3 inch brush, then work backwards towards your exit so as not to get boxed in.
- Apply a second coat 12-24 hours (overnight dry) after the first coat to build good colour and protection.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Primers
Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please Click here
Fibreglass – If the fibreglass is bare you will need a fiberglass primer. For Two Pack Epoxy Fiberglass Primer Click here. For Single Pack Fiberglass Primer Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here
Aluminium – The primer suitable for aluminium is One Pack Etch Primer. Click here
Concrete, Stone or Brick - No primer requiored 1st coat will prime and seal. You will find that these kind of substrates will be porous, we recommend that on your first coat thin by 20% to ensure it impregnates the substrate. Then after 12-24 hours apply the second coat un thinned.
Good Preperation of the is paramount to an excellent long lasting finish. Make sure substrate is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting espesally with laytex or PVC selaers paint will not stick.
Remember do not apply Two Pack Epoxy Paint in temperatures below 10 degrees centigrade cross linking of the paint and catalyst will not take place and the coating will never fully dry.
Always stir your paint up well prior to using
Especially when using Two Pack Epoxy products.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Two Pack Epoxy Resin Paint
Two Pack Epoxy Resin Paint is based on a Industrial grade heavy duty 2 part resin system. Our product titles and images are for advertising purposes only, this product will arrive as Two Pack Epoxy, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
