Clear Decking Sealer
- Application By Brush Roller & Suitable Spray
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- Quick & Easy To Use Multi Purpose Decking Paint
- Suitable For Concrete, Metal, Wood, Stone & Brick
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £56.99 Inc. VAT
- Sale price
- £56.99
- Regular price
-
- Unit price
- per
Benefits of TA Paints
- Easy Application - Saving you precious time
- Fast Drying - Less likely to be ruined whilst drying as its not wet for long
- Multi Application - Use across multiple surface finishes
Benefits
- Multi surface use
- Coverage 8-10 m2 per litre
- Resistant to chemicals and the elements
- High anti corrosion properties
- Strong Polyurethane coating for new and refurbishment projects
- Universal Multi Surface Paint a one paint does all coating for concrete, metal, wood, timber & ply
Surface Preparation Checklist
- Chemically or mechanically hardened floors may need abrasion prior to application
- Remove old paint if necessary
- Remove all loose and flaking materials then clean all dust and dirt from surface to assist good adhesion
- Ensure surface is clean dry and free from any oil or grease that will contaminate the coating and prevent drying
- Ensure surface is at ambient temperature prior to painting to avoid blooming and a slow dry time
Application Tips
- Stir well before use with a substantial stick or mechanical stirrer
- 1-2 coats recommended for best results depending on substrate. For example, porous substrates like wood and timber may need 2 coats, nonporous like metal will require 1 coat
- Fiberglass & GRP will require a separate primer first
- Apply by brush, roller or suitable spray applications
- Ensure good ventilation during and after application
- Always wear proper PPE gloves, glasses and suitable clothing
Description
Universal Decking Sealer
Universal Decking Sealer is a single pack clear paint that can be used on bare concrete, wood or metal in two ways.
Firstly, this product is a concrete primer suitable to be applied to bare concrete once the correct preparation has been carried out. This will impregnate the concrete offering good intercoat adhesion ready for the two coats of top coat.
Secondly this product can be used as a sealer to seal off bare concrete metal or wood. If you are not planning to put a coloured top coat on we recommend using two coats of this.
Please note this is not a translucent clear due to the natural colouring of the resin this does have a yellow tinge.
Key Facts
Can be brushed, roller or spray appliedDo not pre seal concrete especially with latex or PVC sealers paint will not adhere Easy Clean High Gloss Finish
Touch Dry 2-4 hours
Over coat 12-24 hours
Thinners suitable T0001 White Spirit Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)
Suitable for light to medium foot traffic Two Coats recommended for best results
Make sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems. Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Good Preparation of the is paramount to an excellent long lasting finish. Make sure Floor is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.
Always stir paint well prior to using
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.